Enershield-HP - Vapor Permeable Air/Water-Resistive Barrier Membrane

What is Enershield-HP?

Enershield-HP is a one-component, fluid-applied vapor permeable air/water-resistive barrier based on Silica Fortified RubberTM chemistry. This waterproof, resilient coating may be spray-, roller-, brush-, or trowelapplied directly to approved above grade wall substrates. It provides excellent secondary moisture protection behind wall claddings including brick, siding, metal panels, EIFS and stucco. A slipsheet is required for stucco claddings.

Where can Enershield – HP be applied ?

ENERSHIELD-HP can be use over the following exterior wall substrates:

  • Poured concrete/unit masonry 
  • poured concrete/unit masonry treated with  Enershield-FIL,
  • ASTM C1177 type sheathings, including DensGlassTM exterior sheathing, eXPTM sheathing, GlasRoc® sheathing, SecurockTM glass-mat sheathing, Weather DefenseTM Platinum sheathing, GreenGlass®sheathing,
  • PermaBaseTM cement-board by National Gypsum and other cement-boards (ASTM C1325 Type A Exterior)
  • Untreated Exposure I or exterior plywood sheathing (grade C-D or better)
  • Untreated Exposure I OSB, gypsum sheathing (ASTM C79/ASTM C1396).

Features

Benefits

ICC ESR-3209 Evaluation ReportConfirms compliance with IBC, IRC, and IECL requirements.
ABAA evaluatedApproved for projects requiring ABAA specifications and quality assurance
<1% of allowable air leakage per ASTM E2357 Air Leakage of Building Assemblies testEasily meets air tightness requirements defined by ASHRAE 189.1,
ASHRAE 90.1 and ABAA
Meets ASTM D1970 nail sealability requirements with and without Sheathing FabricSelf sealing performance
One component, low-VOC formulationEasy to apply, meets VOC requirements in all 50 states
Nonflammable as appliedWorkplace safety
Mineral oil and plasticizer freeWill not dry out or crack due to loss of oil / plasticizer over time
Water basedCleans up with water; solvents and citrus based cleaners not required
Tough, abrasion resistantRugged membrane resists damage after installation
Approved for use with BASF EIFS and stucco systemsFull system warranty, seamless membrane for buildings with multiple claddings
Low temperature performance with LT AdditiveExtends minimum application temperature to 4˚C
180 day outdoor exposure ratingFlexible construction scheduling

Product Information

Product Bulletin

Contacts

Central Region
+966 11 2790971
Western Region
+966 12 6394799
+966 12 6395702
Eastern Region
+966 13 8084896
South Region
+966 17 2748255

MasterFlow Anchor Grouts Software

MasterFlow Anchor Grouts Software

Download our MasterFlow Anchor Grouts Software